可提供給中大型柴油發電機組組裝廠配套。系列產品涵蓋單機、并機、自啟動運轉機組，并可配套市電發電自動轉換柜(ATS)實現迅速啟動柴油發電機組并切換至柴油發電機組供電。以提供酒店、消防、醫療等應急電力的緊急供應，可靠的設計及穩妥的調試； 有完全專業的工程設計師，并親手進行調試，調試時間短，效果優異； 安全的線路排布 完全依照電氣規范； 通用性強，適用于勞斯萊斯（PERKINS）、沃爾沃（VOLVO）、奔馳（MTU）、大宇（DAEWOO）、道依茨(Deutz)等國內外眾多不同機型、不同容量機組的控制；
功能介紹：
        控制系統采用全自動化控制設計，可選擇手動程序控制、自動程序控制、遙控等控制模式。
可設定柴油機的過程控制時間，包括：預熱或預潤滑時間、啟動延時時間、啟動限時、啟動電機脫離轉速、怠速運行時間、升速過程時間、冷卻停機時間。
    可任意設定的柴油機額定轉速值（非發電機應用時），自動監視發動機在啟動、怠速、升速、全速等過程的速度變化，完成起動電機的投入與撤出、速度過高與過低的預報警及超限停機等。
    可設定報警限定值，自動實現超限預報警（不停機）、報警同時自動停機。
    預報警的項目包括：超速、低速、低油壓、高冷卻溫度、高油溫、低氣溫(低于4℃)、低燃油位、低冷卻水位、低電池電壓、高電池電壓、轉速信號未校準；
顯示功能：
    柴油機運行狀態顯示：根據系統現時的實際情況，顯示設備當前所處的狀態：守侯、開機、供油、啟動、啟動延時、怠速延時、正常運行、冷卻停機、緊急停機。（控制模塊的左邊輸出燈顯示當前運行狀態）
    柴油機運行參數測量顯示：在系統運行過程中，顯示現時的有關參數值： 轉速、冷卻溫度、潤滑油溫度、潤滑油壓力及通過副顯示屏翻頁顯示運行時間、燃油油量、電池電壓。
    柴油機報警狀態顯示：當系統出現故障報警，面板即在相應位置顯示所出現的故障，說明報警類型（預報警或報警）、以及報警原因。
柴油機參數設置顯示：顯示當前系統設置的各個參數值，包括啟動/停機過程延時狀態設定值、運行速度控制設定值和全部的報警、預警參數設定值。

Independent research and development of automatic control system of diesel generators, is made available to the Assembly plant for large diesel generator unit in supporting. Product line covers single, and, since the start of operation units, and can support automatic conversion of AC power (ATS) for rapid boot and switched to diesel generator powered diesel generator set. To provides hotel, and fire, and medical, emergency power of emergency supply, reliable of design and the sound of debugging; has full professional of engineering designers, and personally for debugging, debugging time short, effect excellent; security of line arrangement full in accordance with electric specification; versatility strong, applies Yu Rolls Royce (PERKINS), and Volvo (VOLVO), and Benz (MTU), and large Yu (DAEWOO), and road according to Moskowitz (Deutz), both at home and abroad many different models, and different capacity unit of control;

Function:

Design of control system of automatic control, you can select manual program control, automatic program control, remote control mode.

Can be set to process control of diesel engines, including: pre or pre-lubrication time, initiated delay time, start time, start from the running time, speed, idling speed-speed process time, cooling down time.

Rated engine speed values can be set (non-generator), automatically monitor engine speed in starting, idling, litres, change of speed at full speed, complete start motor input and withdrawal of police, speed, high and low forecast and limit downtime.

Settable alarm limits, overrun pre-alarm automatically (without stopping), alarm and automatic stop.

Prediction of police items including: speed, low speed, low oil pressure, high cooling temperature, high temperature, low temperature (less than 4 ° c), low fuel level, low cooling water level, low battery voltage, battery voltage, higher speed signals are not aligned;

Display function:

Diesel engine running state display: according to the system's actual situation, and displays current status: wait, power, supply oil, startup, startup delay, idle delay time, up and running, cooling down, emergency stop. (Control output on the left side running lights display the current status of the module)

Measurement of diesel engine operating parameters display: during the system operation, displays the current parameter values: speed, cooling, temperature, oil temperature, oil pressure, and by Deputy display page display run timing, fuel quantity, battery voltage.

Diesel engine alarm status display: when the system has a fault alarm, fault of the Panel that appears in the appropriate location, description and alarm type (pre-alarm or alarm), and cause alarm.

Diesel engine parameter setting display: displays the parameter values for the current system settings, including start/stop status settings, speed control with time delay setting and alarm, warning of all parameters to the set value.